ARK CLS Frequency Shaping V2.2
		Next

ARK CLS Frequency Shaping V2.2

ARK CLS Limited

All rights reserved. No part of this publication may be reproduced and/or published by print, photo print, microfilm or any other means without the written consent of ARK CLS Limited. Frequency Shaping is based in part on the work of the Qwt project (http://qwt.sf.net).

Table of Contents

1. Introduction

2. Background and Theory

1. Basics
2. Benefits of Frequency Shaping
3. Frequency Shaping Limitations
4. Bed thickness distribution
5. References

3. Quick Start - Frequency Shaping Tutorial

1. Launching the Application

2. Selecting Data

2.1. Seismic Data

2.1.1. Selecting Trace Data
2.1.2. Loading and Clearing Data

2.2. Well Log Data

3. Designing and Saving the Operators

3.1. Design Operator Dialog
3.2. Main Window Charts

4. Applying the Operators

4.1. Testing the operators (OpendTect variant)

4.2. Applying the operators

4.2.1. Apply Operator dialog within Frequency Shaping (OpendTect variant)
4.2.2. OpenTect Attribute Processing
4.2.3. Apply Operator dialog within Frequency Shaping (OpenWorks connected variant)
4.2.4. Apply Operator dialog within Frequency Shaping (Plug-in for Petrel variant)

4. Frequency Shaping User Manual

1. Interfacing with the Frequency Shaping Application

1.1. Main Window

1.1.1. Menubar Area
1.1.2. Toolbar Area
1.1.3. Chart Area
1.1.4. Status Area

1.2. Frequency Shaping Main Window Ancillary Tools

1.2.1. Save Operator
1.2.2. Import Chart Configuration
1.2.3. Export Operator
1.2.4. Export Data Item
1.2.5. Import Data Items
1.2.6. Parameter Report

2. User interaction with Chart Area

2.1. Direct Interactions

2.1.1. Global Zooming
2.1.2. Identifying Data
2.1.3. Data Zooming
2.1.4. Moving Data
2.1.5. Changing Axes

2.2. Charts Tab Controller

2.2.1. Tabs Layout
2.2.2. Current Tab Charts Layout

2.3. Chart Display Options

2.3.1. Chart
2.3.2. Management of Data Items

3. Select Input Data

3.1. Input Seismic Tab

3.1.1. Select trace data
3.1.2. Loading and Clearing Data
3.1.3. Modifying Time Range
3.1.4. Removing Bad Traces
3.1.5. Select Volume Dialog
3.1.6. Select SEGY Volume Dialog
3.1.7. Edit SEGY Template dialog
3.1.8. Horizon Input Dialog

3.2. Input Well Log Tab

3.2.1. OpendTect Loading Well Logs
3.2.2. Petrel Well Log Loading
3.2.3. OpenWorks Well Log Loading
3.2.4. ASCII Well Log Loading
3.2.5. Define ASCII File Format
3.2.6. Modifying Time Range

4. Design Operator Controls Dialog

4.1. Smooth Seismic Mean
4.2. Fit Well Log Curves
4.3. Design Operator

5. Advanced Controls

5.1. Frequency Domain Advanced Controls
5.2. Time Domain Advanced Controls
5.3. Design Operator Advanced Controls

6. Well Logs Info Dialog

7. Parameter Test Dialog

8. Time Variant Dialog

9. Apply Operator

9.1. OpendTect variant

9.2. OpenWorks connected variant

9.2.1. Select Input Volume
9.2.2. Select Output Volume
9.2.3. Create Output Volume
9.2.4. Select Operator
9.2.5. Select Operator File
9.2.6. 3D Survey Area
9.2.7. Processing Controls
9.2.8. Processing Status

9.3. Plug-in for Petrel variant (within the application)

9.4. Petrel Volume attributes processing

10. Seismic View Dialog

10.1. Toolbars

10.1.1. Inline/Crossline Selector
10.1.2. Tools

10.2. Elements tree view

10.3. Well Logs

10.4. Property Viewer

10.4.1. Seismic Volume Properties
10.4.2. Well Log Properties

10.5. Seismic Display Area

List of Figures

2.1. Seismic Method and Inversion
2.2.
3.1. Attribute Set used to launch the application
3.2. Frequency Shaping Main Window
3.3. Design Operator Controls dialog
3.4. Seismic Charts Tab
3.5. Well Logs Charts Tab
3.6. Design Operators Charts Tab
3.7. Quality Control Charts Tab
3.8. Apply Operator Dialog
3.9. OpendTect Processing
3.10. Apply Operator Dialog
4.1. Main Window
4.2. Frequency Shaping Main Window - Seismic Tab
4.3. Frequency Shaping Main Window - Well Logs Tab
4.4. Frequency Shaping Main Window - Design Operators Tab (showing the top six charts)
4.5. Frequency Shaping Main Window - Design Operators Tab (showing the bottom six charts)
4.6. Frequency Shaping Main Window - Quality Control
4.7. Save Operator dialog
4.8. Export Data Item dialog
4.9. Parameter Report dialog
4.10. Global Chart Area Zooming
4.11. Identifying Data from Charts
4.12. Data Zooming on Charts
4.13. Charts Tab Controller dialog
4.14. Display Options dialog
4.15. Changing Chart Properties
4.16. Management of Data Items
4.17. Loading Seismic Data
4.18. Clearing Seismic Data
4.19. Modifying Seismic Time Range (Full)
4.20. Modifying Seismic Time Range (Sub)
4.21. Modifying Seismic Time Range (Horizon).
4.22. Removing Bad Traces
4.23. Select Volume
4.24. Select SEGY
4.25. Edit Template
4.26. Select Horizon
4.27. Select Input Data Dialog - Input Well Log Tab
4.28. Loading Well Logs from OpendTect
4.29. Select Well Logs
4.30. Generate AI Log
4.31. Petrel Well Log Selection
4.32. OpenWorks Well Log Selection from Synthetic Seismic in Time
4.33. OpenWorks Well Log Selection when Converting Logs from Depth to Time
4.34. Select Wellset (OpenWorks connected variant)
4.35. Select Interpreter (OpenWorks connected variant)
4.36. Select Database Log (OpenWorks connected variant)
4.37. ASCII Well Log Selection
4.38. Configure ASCII Well Log Position
4.39. Define ASCII File Format
4.40. Modify Well Log Time Range (Full)
4.41. Modify Well Log Time Range (Sub)
4.42. Modify Well Log Time Range (Horizon)
4.43. Modify Well Log Time Range (Well Markers)
4.44. Design Controls Dialog
4.45. Smooth Seismic Mean
4.46. Fit Well Log Curves
4.47. Design Operator
4.48. Frequency Domain Advanced Controls Tab
4.49. Time Domain Advanced Controls Tab
4.50. Design Operator Advanced Controls Tab
4.51. Well Logs Info Dialog
4.52. Parameter Test Dialog
4.53. Parameter Test Dialog
4.54. Time Varying Convolution Operator Zones
4.55. Adding a Zone
4.56. Selecting an operator
4.57. Configuring multiple operators
4.58. Contribution of Tapers
4.59. Apply Operator Dialog
4.60. Apply Operator Dialog (OpenWorks connected variant)
4.61. Select Input Seismic Volume
4.62. Select Output Seismic Volume
4.63. Create New Seismic Volume
4.64. Create New Seismic Volume - Advanced Volume Parameters (.3dv Tab)
4.65. Create New Seismic Volume - Advanced Volume Parameters (Bricked Tab)
4.66. Create New Seismic Volume - Advanced Volume Parameters (Compressed Tab)
4.67. Select Operator
4.68. Select Operator from ASCII file
4.69. Specify 3D Survey Area
4.70. Processing Controls
4.71. Processing Status
4.72. Apply Operator Dialog
4.73. Volume attributes processing
4.74. Volume attributes processing - Time Variant
4.75. Seismic view
4.76. Seismic view with the derived operators
4.77. Seismic view with the derived operators - Time Variant
4.78. Selecting Seismic Data
4.79. Adding Raw Well Logs to Seismic View
4.80. Raw logs within Seismic View
4.81. Seismic Volume Properties
4.82. Well Log Properties

Frequency Shaping can be used on multiple operating systems and connect to different databases. Therefore, the exact appearance of some figures may differ slightly from those shown.

		Next
		Chapter 1. Introduction